Epoxy Adhesive Paste

DESCRIPTION:

Fortseal Adhesive Paste is a general purpose epoxy adhesive which is packed as a two component product comprising a resin and hardener. The mixed paste may be used to fill, seal, coat and bond surfaces such as concrete and plaster.

KEY APPLICATIONS:

1. Sealant

Fortseal Epoxy Adhesive Paste is ideal for sealing and filling cracks in concrete, plaster surfaces and water tanks.

2. Adhesive

It is equally ideal to use when bonding different materials to each other such as – wood to concrete; steel to ceramic and ceramic to wood. Fortseal Epoxy Adhesive Paste is also suitable for securing concrete tiles or slabs onto walls and floors.

3. Electrical Insulation

Fortseal Epoxy Adhesive Paste does not conduct electricity and as such, can be used to temporarily encapsulate electrical connections for insulation purposes.

4. Coating

Fortseal Epoxy Adhesive Paste is suitable to coat and seal pre-cast concrete tanks, concrete pipes and concrete troughs.

KEY BENEFITS:

1. Fortseal Epoxy Adhesive Paste has excellent adhesion to most or combination of surfaces including metal, brick, plaster, wood, marble and concrete.

2. Fortseal Epoxy Adhesive Paste can be applied on vertical surfaces up to 2mm without slumping and has good resistance to water, solvents, oils, petrol and other chemicals.

3. Fortseal Epoxy Adhesive Paste has excellent waterproofing properties.

DIRECTIONS FOR USE:

1. Ensure surfaces to be bonded are free of dust, oils, wax and dirt.

2. Mix RESIN and HARDENER in equal parts thoroughly until you achieve a consistent coloured paste.

3. Apply using a trowel or a suitable tool (to fill, coat, and bond).

4. It is advisable to mix just enough quantities at a time; mixed compound has a pot-life of 40 minutes depending on temperature and quantity.

5. The compound completely cures overnight and will continue to harden further with time.

6. Clean all tools using lacquer thinners immediately after use. Wash hands using warm soapy water.